360L Auto Parts Industrial Ultrasonic Cleaner

Why You Should Have Automotive Ultrasonic Cleaner?

There are so many uses for an ultrasonic cleaner in an auto shop. Ultrasonic car parts cleaning saves time by eliminating the need for manual scrubbing of auto parts covered with grease, oil, and other lubricants. Besides freeing up time, hazardous chemicals can be replaced with biodegradable soaps. Specific examples of items that are commonly cleaned by a benchtop ultrasonic cleaner include filters, shock absorber parts, power steering parts, pistons, valves, fuel injectors, bearings – just to name a few. Larger industrial-sized units can be used for carburetor ultrasonic cleaning and ultrasonic exhaust manifold cleaning, where cleaning action is needed deep within the network of passages. This large capacity also allows for ultrasonic crankshaft cleaning and ultrasonic cylinder block cleaning as well as the means to clean multiple parts at once.

ULTRASONIC CHARACTERISTICS
Ultrasonic cleaning uses cavitation bubbles induced by high-frequency pressure (sound) waves to agitate a liquid. The agitation produces high forces on contaminants adhering to substrates like metals, plastics. glass, rubber, and ceramics. This action also penetrates blind holes, cracks, and recesses.
The intention is to thoroughly remove all traces of contamination tightly adhering or embedded onto solid surfaces. Water or other solvents can be used, depending on the type of contamination and the workplace. Contaminants may include dust, dirt, oil, pigments, rust, grease, algae, fungus, bacteria, limescale, polishing compounds, flux agents, fingerprints, soot, wax and mold release agents, biological soils like blood, and so on.
Ultrasonic cleaning can be used on a wide range of shapes, sizes, and materials, and may not require the part to be disassembled prior to cleaning. Objects must not be allowed to rest on the bottom of the device during the cleaning process, because that will prevent cavitation from taking place on the part of the object, not in contact with water.

Brief Introduction Of 360L Ultrasonic Cleaner:

360L ultrasonic cleaner will be the most powerful cleaning tool in the woodworking shops, metalworking shops, car repair workshops and, etc. Do you want a more powerful tool? Don’t worry, you can choose any function you need for 360L ultrasonic cleaner. It is including at least below functions but not last. If you need other functions, you can contact our sales team for more information. 

• Ultrasonic cleaning machine with oil filtration function. (This function can separate the oil and floating material on the surface of cleaning solution which will prevent the second pollution to the cleaning objects and recycle the cleaning solution for reuse.)
• Ultrasonic cleaning machine with auto lifting function. (Auto lift function can allow you to load and unload the heavy parts easily with simple control which can avoid the injury risks)
• Ultrasonic cleaning machine with the agitating system. (This function will move dirty parts up and down in certain speed which can help to remove large dirty particle on the surface and it can improve cleaning effect a lot)
• Ultrasonic cleaning machine with drying system. (Drying function will let you dry the part immediately after cleaning in case of oxidation on the surface of clean parts. You can also choose air gun for the drying system)
• Ultrasonic cleaning machine with rinsing system. (Rinsing system will be helpful when you have high requirements for the cleaning object. You can choose several rinsing tanks to make sure your parts get clean. Besides, you can also install the transducers on the rinsing tank which will improve rinsing effect much more than without ultrasonic)
• Ultrasonic cleaning machine with a rotating system. (This function will help clean round objects like the car wheel. It will make the wheel rotating at a certain speed when ultrasonic cleaning which can clean every angle of the wheel)
• Ultrasonic cleaning machine with spraying system. (Spraying system will use high-pressure water to prewashing dirty parts before ultrasonic cleaning which will remove some large contaminants)
• Ultrasonic cleaning machine with PLC control. (PLC touch control will allow you to set all the functions in one single touch panel, it is suitable for complicated functions )

Furthermore, you can also choose different timer according to your requirements. 

PLC Control:

Customer’s Feedback: