360L Aerospace Parts Industrial Ultrasonic Cleaner

360L aerospace parts industrial ultrasonic cleaner will be very helpful for cleaning dirty aerospace parts.  You can choose the different functions to improve cleaning jobs like oil filtration, lifting system, agitating system, drying system, rinsing system and, etc. If you are worrying about the cleaning result, you can ask our sales team to arrange the free testing service for you.

Additional information

Color

Silver

Ultrasonic Power

3600W

Heating Power

9000W

Capacity

360L

Tank size

1000*600*600mm

Unit Size

1140*740*820mm

Single Packing Size

1300x900x1100mm

Oil Filtration

No, Yes

Details About 360L Aerospace Parts Industrial Ultrasonic Cleaner

Why You Need Hongsonic Ultrasonic Cleaner For Aircraft Parts?

Even small traces of residue, grease, or grime on parts used to build and repair aircraft – from jets to rockets – can cause a catastrophic explosion. Therefore, these parts must be routinely and thoroughly cleaned to restore them to their original condition. However, precision cleaning and handling of these parts can become labor-intensive, lengthy, and quite costly.

With ultrasonic cleaning technologies, aircraft and rocket parts from small and lightweight to large and heavy are being cleaned in just minutes by using sound waves that gently remove particles and oily residues. This process restores the parts for flight and increases safety for the industry. In addition, handling time is reduced, allowing for significant savings for aerospace manufacturers and the firms providing ultrasonic cleaning services to them.

Outsourcing cleaning:

For many aerospace manufacturers, maintaining a clean room and staffing it with trained technicians is expensive – especially if they don’t have a large number of parts that require regular cleaning. In addition, technicians often lack the experience to properly clean parts and equipment, so many turns to precision cleaning companies to do it for them. Even large aerospace manufacturers may outsource the cleaning process to be assured parts are being cleaned and handled by experts.

How ultrasonic cleaning works:

Generators produce high-frequency electricity that is then converted into sound waves through a transducer, making the waves vibrate. As the waves travel through water, tiny vacuum bubbles form and repeatedly implode upon any surface they encounter, removing even microscopic dirt particles. These cavitation bubbles reach and clean grooves, cracks, and hidden crevices more effectively than alternative methods.

Ultrasonic cleaning technology does not require toxic chemicals or manual work, and many units use only water-based solutions.

 

Brief Introduction Of 360L Ultrasonic Cleaner:

360L ultrasonic cleaner will be the most powerful cleaning tool in the woodworking shops, metalworking shops, car repair workshops and, etc. Do you want a more powerful tool? Don’t worry, you can choose any function you need for 360L ultrasonic cleaner. It is including at least below functions but not last. If you need other functions, you can contact our sales team for more information. 

  • Ultrasonic cleaning machine with oil filtration function. (This function can separate the oil and floating material on the surface of cleaning solution which will prevent the second pollution to the cleaning objects and recycle the cleaning solution for reuse.)
  • Ultrasonic cleaning machine with auto lifting function. (Auto lift function can allow you to load and unload the heavy parts easily with simple control which can avoid the injury risks)
  • Ultrasonic cleaning machine with the agitating system. (This function will move dirty parts up and down in certain speed which can help to remove large dirty particle on the surface and it can improve cleaning effect a lot)
  • Ultrasonic cleaning machine with drying system. (Drying function will let you dry the part immediately after cleaning in case of oxidation on the surface of clean parts. You can also choose air gun for the drying system)
  • Ultrasonic cleaning machine with rinsing system. (Rinsing system will be helpful when you have high requirements for the cleaning object. You can choose several rinsing tanks to make sure your parts get clean. Besides, you can also install the transducers on the rinsing tank which will improve rinsing effect much more than without ultrasonic)
  • Ultrasonic cleaning machine with a rotating system. (This function will help clean round objects like the car wheel. It will make the wheel rotating at a certain speed when ultrasonic cleaning which can clean every angle of the wheel)
  • Ultrasonic cleaning machine with spraying system. (Spraying system will use high-pressure water to prewashing dirty parts before ultrasonic cleaning which will remove some large contaminants)
  • Ultrasonic cleaning machine with PLC control. (PLC touch control will allow you to set all the functions in one single touch panel, it is suitable for complicated functions )

Furthermore, you can also choose different timer according to your requirements. 

PLC Control:

 

Customer’s Feedback:

Share 360L Aerospace Parts Industrial Ultrasonic Cleaner With Your Clients

Share to Linkedin
Share to Facebook
Share to Twitter
small_c_popup.png

Let's have a chat

Learn how we helped 1000 customers Solve Cleaning Trouble.