3.2L Carburetor Ultrasonic Cleaner Without Drain Vavle

How To Choose Your Carburetor Cleaner?

Ok, so you’ve decided that ultrasonic cleaning looks right for you. So how do you get started? First, you need to ask yourself a few questions:

How big are my carburetors?
How many parts do I want to clean at once?
How quickly do I need the cleaning to be done?
What’s the soil load like on my carburetors, what soil is it?

The answers to these questions will dictate the size, and what accessories you need with your new carburetor cleaner. The first question is kind of a no-brainer. The size of your carburetor will dictate the size of the tank, and what kind of basket you will need.

For proper ultrasonic transmission, an ultrasonic unit needs about an inch of space from the bottom of the tank, to the bottom of the object being cleaned. To facilitate this, most users employ a mesh or perforated tray.

Mesh baskets are great for smaller parts, while a perforated tray may be needed for heavier parts. Remember: the price of an ultrasonic cleaner goes up drastically with tank size. If you have large parts, you can always clean one side, flip it over, then clean the other.

This obviously will take twice as long but can save you hundreds when purchasing a machine.

Do you plan to clean multiple carburetors at once? This will also require an increase in tank size. It is unwise to jam your cleaning basket full to the brim with delicate carburetor parts, as ultrasonic cleaning does cause a slight vibration which will make your parts rub against each other during cleaning.

There is also the shadowing effect to consider, parts in the middle of the pile will not be cleaned nearly as well as parts on the outside. As far as speed is concerned, this also goes along with how many parts you wish to clean at once.

Most ultrasonic cleaners available to the general public come in three sub-models: mechanical timer only, mechanical timer with heat, and lastly some sort of digital control with heat.

For cleaning carburetors, any type with heat is STRONGLY recommended. Petroleum-based soils require heat to clean effectively, and while you could fill your tank with hot water every time, it’s much better to have a constantly heated tank. This will save you both time and money in cleaning chemistry.

Why Carb Ultrasonic Cleaner Is Needed For Your Motor Parts Cleaning??

This is from one of our customers:

“Those of you that have had experience cleaning carburetors know how tedious and timely this procedure can be. What products should one use? What tools work best without damaging brass, aluminum, rubber, and plastic components? It can be very difficult to remove tarnish residue from inaccessible internal passages and open areas. When fuel sits in a carburetor over a long period of time, the ethanol separates from the fuel, creating tarnish build up inside the carb. The fuel we put in our vehicles today has a higher ethanol percentage than before. In the past, I have never really had problems cleaning carburetors with a carb dip solution, contact cleaner, and q-tips, but recently I have found this tactic hasn’t proven to be as effective. I have found the most efficient way to clean a carburetor is with an ultrasonic cleaner. ”

Brief Introduction Of 3.2L Ultrasonic Cleaner:

3.2L ultrasonic cleaner is a helpful cleaning tool for your dirty parts. It has 120W ultrasonic power which can handle the normal cleaning job. Besides we have five different series for you to choose.

• Digital control ultrasonic cleaner without additional function. (This model is a classic model which was made more than 20 years ago. It has stable quality and power. )
• Mechanical control ultrasonic cleaner without additional function. (This model is also a classic model which was made more than 20 years ago. The analog control is an easy control way. It has stable quality and power. )
• Digital control ultrasonic cleaner with degas and double power. (This model is designed for handling heavy cleaning tasks and light cleaning tasks at the same time. You can choose different power according to your cleaning task. The degas function will help improve the cleaning effect.)
• Digital control ultrasonic cleaner with low noise and power-adjustable. (This model is specially designed for customers who need a low noise environment. It can cut working noise under 60db.)
• Digital control ultrasonic cleaner with adjustable power. (This model can adjust ultrasonic power from 0 to full power)
• Digital control ultrasonic cleaner with sweep frequency, degas and power-adjustable. (This model has sweep frequency function which can avoid the hot spot during ultrasonic cleaning)

You might want to know what is degas function and what is sweep frequency function. Please check below:

Degas: Degas function can drive out gas in cleaning liquid which will absorb ultrasonic energy.

Sweep frequency: Sweep frequency technology to ensure uniform levels of ultrasonic activity throughout the fluid, these baths offer high performance giving an accurate and precise ultrasonic process. It can avoid the hot spot on the cleaning object.

Customer’s Feedback: