10L Jewelry Ultrasonic Cleaner With Drain Vavle

A Typical Ultrasonic Jewelry Cleaning Sequence

Experience is the best teacher, and over time you will develop your own routine for your ultrasonic jewelry cleaning procedures. We offer these suggestions as a way to start.

1. Prepare the cleaning solution.
   If your equipment does not have a degas mode allow it to operate for 10 minutes to drive off trapped air in a process called degassing. (This should be done each time you prepare a fresh batch of solution.)
2. In the meantime position objects to be cleaned in the mesh basket. When ready simply lower the basket into the cleaning solution, close the lid and set the timer for 5 minutes.

   Actual cleaning time depends on the number of items being cleaned and their condition.

3. At the end of the cycle remove the basket and allow solution to drip back into the tank. Rinse the items and let them dry. Electric hot air dryers are available for this operation.

More Tips on Ultrasonic Jewelry Cleaning

Do not overload the basket. If possible minimize or avoid contact between parts being cleaned. It is better to clean a small number of items at a time.

The cleaning solution should be replaced when cleaning cycles get longer. Drain the tank and dispose of the solution according to local regulations, thoroughly rinse the tank with clean water and prepare a new batch.

Read and follow the manufacturer’s user guide for ultrasonic cleaner operation and maintenance.

Brief Introduction Of 10L Ultrasonic Cleaner:

10L ultrasonic cleaner is a helpful cleaning tool for your dirty parts. It has 360W ultrasonic power which can handle the normal cleaning job. Besides we have five different series for you to choose.

• Digital control ultrasonic cleaner without additional function. (This model is a classic model which was made more than 20 years ago. It has stable quality and power. )
• Mechanical control ultrasonic cleaner without additional function. (This model is also a classic model which was made more than 20 years ago. The analog control is an easy control way. It has stable quality and power. )
• Digital control ultrasonic cleaner with degas and double power. (This model is designed for handling heavy cleaning tasks and light cleaning tasks at the same time. You can choose different power according to your cleaning task. The degas function will help improve the cleaning effect.)
• Digital control ultrasonic cleaner with low noise and power-adjustable. (This model is specially designed for customers who need a low noise environment. It can cut working noise under 60db.)
• Digital control ultrasonic cleaner with adjustable power. (This model can adjust ultrasonic power from 0 to full power)
• Digital control ultrasonic cleaner with sweep frequency, degas and power-adjustable. (This model has sweep frequency function which can avoid the hot spot during ultrasonic cleaning)

You might want to know what is degas function and what is sweep frequency function. Please check below:

Degas: Degas function can drive out gas in cleaning liquid which will absorb ultrasonic energy.

Sweep frequency: Sweep frequency technology to ensure uniform levels of ultrasonic activity throughout the fluid, these baths offer high performance giving an accurate and precise ultrasonic process. It can avoid the hot spot on the cleaning object.

Application Of 10L ultrasonic cleaner:

It can be widely used in various industries. Please check the chart below:

Customer’s Feedback: